No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Touch Panel

Touch Panel

Table 8-11 describes common faults that may occur on the touch panel and their troubleshooting methods.

Table 8-11 Common faults and their troubleshooting methods

Symptom

Possible Cause

Solution

If the font size is set to Large or Huge for the touch panel, the UI will be displayed incorrectly. For example, if a specific video layout is used, the slider is covered by the characters and cannot be moved to the bottom.

Change the font size to Normal.

  1. Slide down from the top of the touch panel and tap .
  1. On the Settings screen, choose Display > Font size and set the font size to Normal.
Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 31988

Downloads: 163

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next