No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Home Screen

Home Screen

You can customize the home screen, such as specifying whether the site name, IP address, system time, or date is displayed.

NOTE:

The following operations are based on the remote control UI. Some parameters can also be set on the web interface. To set the parameters on the web interface, log in to the web interface and choose System Settings > Display > Site Name.

  1. On the remote control UI, choose Advanced > Settings > Display > Personalize.
  2. Set the custom parameters described in Table 5-1.

    Table 5-1 Custom parameters

    Parameter

    Description

    Setting

    Transparency

    Specifies the transparency of the remote control UI against the background image.

    If you set this parameter to Opaque, the background image is not displayed on operation screens except the call and menu screens.

    If you set this parameter to other values, the background image is visible on the remote control UI.

    The default value is 15%.

    Display IP address

    Specifies whether to display the local IP address on the conferencing screen.

    This parameter is selected by default.

    Select conference controls

    Specifies the conference control functions you want to display on the Conference Control screen.

    None

    Site name

    Specifies the site name you want to be superimposed on the video of your site when it displays to other sites.

    When your site joins a multipoint conference, this site name is displayed in the site list.

    The default value is site.

    Display position

    Specifies the position where your site name is superimposed on the video of your site.

    The default value is Lower right corner.

    Display duration

    Specifies the duration for displaying a site name.

    The default value is Always display.

    Display time and zone

    Specifies whether the time zone and time are superimposed on the local video sent to remote sites. The time zone and time are superimposed in the upper right corner of the local video.

    The time zone and time are not displayed on the local video shown on the display device at your site.

    This parameter is not selected by default.

    Font color

    Specifies the color in which a site name is displayed.

    The default color is white.

    Font size

    Specifies the font size for the site name display.

    The default value is Medium.

    Font Type

    Specifies the font type of captions.

    Settings of this parameter take effect only when the language of the remote control UI is set to simplified Chinese.

    The default value is Elegant black.

    Bold

    Specifies whether a site name is displayed in bold.

    This parameter is not selected by default.

    Background color

    Specifies the background color for the site name display.

    The default color is gray.

    Transparency

    Specifies the transparency for the site name display.

    The default value is Fully transparent.

    Set the horizontal offset

    Fine-tunes the site name's position left or right on the local video.

    The default value is 48.

    Value range: 0-96.

    Set the vertical offset

    Fine-tunes the site name's position up or down on the local video.

    The default value is 48.

    Value range: 0-96.

  3. Select Save.
Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 32520

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next