No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Groups Using the Remote Control

Adding Groups Using the Remote Control

If certain sites regularly join the same conference, you can define these sites as a group.

  1. Press on the remote control to access the menu screen.
  2. Choose Advanced > Address Book from the option bar.
  3. If no group is displayed, choose Group > Add Group. If some groups exist, select next to any group, and press on the remote control.
  4. In Create Group, name the group.
  5. Select a site you wish to add to the group and press OK on the remote control.

    After being selected, the site has a check mark (√) next to its name and is listed in the group box.


    To delete the site from the group, press on the remote control again.

  6. Select Save and press on the remote control.

    You will see the new group in the group list on the Address Book screen.

Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 32142

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next