No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing and Exporting Settings

Importing and Exporting Settings

You can configure endpoints in batches by importing the configuration file on the web interface (exporting supported also) or from a USB device.

Importing and Exporting Settings on the Web Interface

You can export settings on the endpoint web interface to a configuration file. After your endpoint is restored to its default settings, you can import previously exported settings from the configuration file.

Keep the configuration file safe to prevent disclosure of personal information.

  1. Choose System Settings > Installation. The Installation page is displayed.
  2. Click Import/Export Settings. The Import/Export Settings page is displayed.
  3. Click Import Settings or Export Settings to import or export system settings.

    The web administrator password is required when you import the configuration file. After the configuration file is imported successfully, the endpoint automatically restarts for the configuration file to take effect.

Importing Settings on the USB Device

The endpoint allows you to use a license to disable the USB function to meet information security requirements. Before using a USB device to import the configuration file, ensure that the USB function is enabled and functions properly.

  1. Use the USB configuration tool to import the configuration file to a USB device.
  2. Insert the USB device into the endpoint's USB port.
  3. Using the remote control, enter the administrator password as prompted.

    The endpoint restarts automatically.


    When compressing the configuration file, set the password to the same as the administrator password for the remote control UI; otherwise, the configuration file cannot be imported to your endpoint. If the administrator password for the remote control UI is empty, set the password to 12345678, which is the default password for the remote control UI administrator.

  4. After the restart is complete, remove the USB device.
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 35835

Downloads: 180

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next