No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fault Diagnosis Model

Fault Diagnosis Model

Figure 8-1 shows the diagnosis model for your endpoint.
Figure 8-1 Diagnosis model

According to Figure 8-1, diagnosis functions diagnose the audio, video, and network modules.

Audio signals are transmitted in the following paths:

  • Local microphone → 1 → 5 → Communications network → 6 → 7 → Remote speaker
  • Local speaker ← 2 ← 5 ← Communications network ← 6 ← 8 ← Remote microphone

Video signals are transmitted in the following paths:

  • Local camera → 3 → 5 → Communications network → 6 → 9 → Remote monitor
  • Local monitor ← 4 ← 5 ← Communications network ← 6 ← 10 ← Remote camera
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 32225

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next