No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Web Interface

Logging In to the Web Interface

You can remotely manage the endpoint after logging in to the endpoint web interface.


Before running the endpoint web interface on a web browser, configure the browser. For details, see Configuring the Browser.


  1. Open Internet Explorer.
  2. In the address box, enter the endpoint IP address, such as
  3. Press Enter.

    The login page is displayed.

  4. Fill in User name and Password.

    • The default user name and password are admin and Change_Me respectively. You are advised to change the default password the first time you log in to the web interface, and then change your password regularly.
    • If you forget only the web login password, use the debug account to log in to the endpoint and run the web password command to change the web login password. For the detailed procedure of login using the debug account, see Performing SSH Access Control. For details about CLI operations, see TE30&TE40&TE50&TE60&TX50&RP100&RP200 Command Reference.
    • If you forget the passwords of all accounts, restore the endpoint to its factory settings when the endpoint is running. For the TE30, keep holding the MODE button for 10s and then release it; for the TE40, TE50, TE60, or TX50, keep holding the RESET button for 10s and then release it.

  5. From the Language drop-down list, select a language.
  6. Click Log In.

    The home page is displayed, as shown in Figure 1-6.

    Figure 1-6 Home page of the endpoint web interface


To ensure data security, after using the endpoint web interface, close the browser and delete browser caches.

Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30987

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next