No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Encryption

Configuring Encryption

You can enable encryption to improve video communication security.


On an IP network that is neither quality-guaranteed nor secure, encryption can be used to increase the video communication security, though it may affect the call rate. Both parties in communication must support encryption, including H.235 encryption and Secure Real-time Transport Protocol (SRTP) encryption.

To improve communication security, you are advised to enable encryption.

Before initiating a Session Initiation Protocol (SIP) encrypted conference, you are advised to enable encryption and Transport Layer Security (TLS) registration to improve communication security.


To configure encryption on the remote control UI:

  1. Choose Advanced > Settings > Security > Encryption and select one of the following options:
    • None: No stream is encrypted.
    • Forced: Streams are forced to be encrypted. If you select this option, your endpoint can attend encrypted conferences only. To improve communication security, select this option.
    • Auto: The endpoint uses the appropriate encryption policy and algorithm to encrypt streams. Streams are encrypted only when a call is set up. If you select this option for the local site and encryption is disabled at a remote site, the conference between the local and remote sites is not encrypted.
  2. Select Save.

To configure encryption on the web interface:

  1. Log in to the web interface, choose System Settings > Security > Encryption and configure the encryption mechanism.
  2. Select Save. The settings take effect immediately.
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 32605

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next