No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Defining Custom Settings for the Touch Panel

Defining Custom Settings for the Touch Panel

On the touch panel UI, you can define custom settings, such as enabling the intranet version and specifying the parameters of its functions and enabling the passcode, conference schedule, and intelligent conference room functions.

  1. Choose > Setting > Advanced Settings on the touch panel UI, enter the administrator password of touch panel UI to access the Advanced Settings screen.
  2. Tap Connection Settings to access the Connection Settings screen.
  3. Tap and hold IP address for 5s to bring up the Custom Settings window.
  4. Set custom setting parameters as described in Table 7-14.

    Table 7-14 Custom setting parameters

    Parameter

    Description

    Intranet version

    Whether to enable the intranet version.

    Enable Passcode

    After enabling this function, you will see a passcode input box on the home screen of the touch panel UI.

    This function is enabled by default.

    Hide End Conference Button

    After enabling this function, you will not see the End Conference button. Users can leave but cannot end the conference.

    This configuration item can be set after you enable the intranet version. This configuration item is enabled by default.

    Conference schedules

    After enabling this function, you will see the conference schedules on the home screen of the touch panel UI.

    Conference schedule refresh interval

    Interval at which the conference schedules are updated.

    The default interval is 2 minutes. If this parameter is set to 0, the touch panel will not update the conference schedules.

    Touch panel software version

    Displays the information about the current touch panel version.

    Keep network connection when system is locked

    Specifies whether to retain the network connection after a system lock.

    Customized multi-screen

    Specifies the continuous presence layout.

    Enable intelligent conference room

    Specifies whether to enable the intelligent conference room function.

    Intelligent conference room type

    You can see this parameter only after enabling the intelligent conference room function.

    Three options are available: Tri-screen, Mid-sized, and Small.

    Enable remote camera name

    After enabling this function, you can set a name for the remote camera.

    Site list special sorting algorithm

    After this function is enabled, the site being broadcast by the chair site is displayed as red and bold in the site list.

  5. Tap Save.
Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30630

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next