No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Status Icons

Status Icons

You can customize which status icons are displayed on the home screen, helping you quickly understand the endpoint's status.

For details about common status icons, see Icons on the User Interface.

On the remote control UI and web interface, you can customize status icons based on your actual needs.
  • To display or hide a status icon on the web interface, choose System Settings > Display and click the Icon tab to access the tab page shown in Figure 5-1.
    Figure 5-1 Status icon settings on the web interface
  • To display or hide a status icon on the remote control UI, choose Advanced Settings > Setting > Display > Icon to access the screen shown in Figure 5-2.
    Figure 5-2 Status icon settings on the remote control UI

Packet Loss Rate Icon

By comparing the packet loss rate on the current network with threshold A and threshold B, the endpoint determines whether to display the packet loss rate icon on the remote control UI. The policy is as follows:


Threshold A must be less than threshold B. Their value ranges are 0.1% to 100%. The default values for threshold A and threshold B are 1% and 5%, respectively.

  • If the packet loss rate is less than or equal to threshold A, no packet loss rate icon is displayed.
  • If the packet loss rate is between threshold A and threshold B, is displayed.
  • If the packet loss rate is greater than or equal to threshold B, is displayed.

When Serious packet loss notice is enabled, the remote control UI displays a text alert if the packet loss rate is greater than threshold B for 5 seconds or more.

Other Icons

A status icon is displayed on screens if the following conditions are met:

  • The status icon to be displayed on screens is selected.
  • The function or the condition that corresponds to the status icon has been enabled.
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30180

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next