No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Browser

Configuring the Browser

Before using the endpoint web interface for remote management, configure the web browser on your computer.

Context

The endpoint web interface supports the following web browsers:

  • Internet Explorer 11
  • Firefox 39–54
  • Chrome 41–59
  • Safari 10.1
  • Microsoft Edge 40

Microsoft Internet Explorer is recommended. If you use other browsers or versions, the web interface may appear slightly different. The web interface will still work as expected.

NOTE:
  • Before you begin, ensure that the latest patches for the operating system and browser are installed.
  • It is recommended that you use Microsoft Internet Explorer 11 or later. Microsoft has stopped maintaining versions earlier than Internet Explorer 11 or releasing patches for them. Using any of the earlier versions may pose security risks.

Procedure

The following description uses Window 7 as an example to describe how to configure Microsoft Internet Explorer 11, Mozilla Firefox 44.0.2, and Google Chrome 46.0.2490.80 m. The methods for configuring other browser versions are similar.

  1. Start Internet Explorer.
  2. From the Internet Explorer menu bar, choose Tools > Internet Options. In the displayed Internet Options dialog box, click the Security tab.
  3. In the bottom of the tab, click Custom level.
  4. In the Security Settings dialog box that is displayed, perform the following operations:
    1. Set all options under Downloads and Scripting to Enable.
    2. Select Display mixed content under Miscellaneous.
  5. Click OK.
  6. On the Security tab, click Trusted site and then Site.

    The Trusted site dialog box is displayed.

  7. In the Add this website to the zone text box, enter the IP address of your endpoint. Then click Add.
  8. Click OK.
  9. Click the Privacy tab. Move the slider to display the Medium level.
  10. Click the Advanced tab. Select Use TLS 1.1 or Use TLS 1.2 under Security.
  11. Click OK.

    The configuration is complete.

NOTE:

To ensure that information can be properly displayed, if you choose to skip 6 through 8, choose Tools > Pop-up Blocker > Turn Off Pop-up Blocker from the menu bar of Internet Explorer.

If you use Mozilla Firefox or Google Chrome, configure it as follows:

  • Click in the right corner of the Firefox menu bar to open the settings window. Click Privacy, select Accept cookies from sites, and click OK.
  • Use the default settings for Google Chrome.
Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30836

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next