No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Table 8-6 lists the troubleshooting methods for problems that may arise on the network.

Table 8-6 Methods for troubleshooting common network problems


Possible Cause


When you attempt to use Telnet to access the endpoint, a message is displayed to indicate that the number of connections to the endpoint has reached the limit.

The number of connections to the endpoint has reached the maximum value.

  • A maximum of seven SSH and Telnet connections to the endpoint is allowed.
  • A maximum of three SSH connections to the endpoint is allowed.

Disconnect some Telnet connections.


By default, the Telnet service is disabled. The Telnet service is generally used to query system status and logs and perform specific maintenance. Exercise caution when enabling this service.

Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30110

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next