No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling FTPS

Enabling FTPS

The endpoint supports File Transfer Protocol over SSL (FTPS) and File Transfer Protocol (FTP). To improve communication security, enable FTPS. If FTPS is disabled, the endpoint uses insecure FTP.

You can enable FTPS in one of the following ways:

  • On the remote control UI, choose Advanced > Settings > Network > Address Book > FTP Address Book and enable FTPS.
  • On the web interface, choose System Settings > Network > Address Book, click the FTP Address Book tab, and enable FTPS.
  • Use commands to enable FTPS. For details, see the TE30&TE40&TE50&TE60&TX50&RP100&RP200 Command Reference.
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 32039

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next