No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Accounts

Default Accounts

To better use your endpoint, get to know the default values of common user names and passwords and default IP addresses.

NOTE:

To ensure account security, you are advised to change the password at the first login and regularly change the password afterward.

Table D-1 lists the default user names and passwords for the endpoint.

Table D-1 Default user names and passwords

Item

Default Setting

Administrator password for the user interface (remote control)

12345678

Password for unlocking the user interface (remote control)

12345678

Administrator user name and password for the endpoint web interface

The default user name and password are admin and Change_Me respectively.

User name and password for a third party (for example, a touch panel or a Videxio platform) to connect the endpoint or for the SMC2.0 to add the endpoint as a manageable site

The default user name and password are api and Change_Me respectively.

Administrator password of the touch panel UI

Change_Me

User name and password for logging in to the endpoint in SSH/Telnet mode

  • Debug user: The default user name and password are debug and Change_Me respectively.
  • Common user: The default user name and password are admin and Change_Me respectively.
  • Common user: The default user name and password are user and Change_Me respectively.
  • Touch panel user: The default user name and password are apiuser and Change_Me respectively.
  • Test user: The default user name and password are test and Change_Me respectively.

User name and password for connecting the endpoint to the network diagnostics tool

The default user name and password are admin and Change_Me respectively.

User name and password for logging in to the endpoint in serial port mode

NOTE:

To make the serial port account and functions available on a TE30, use the USB-to-serial cable to convert the USB port into a serial port and then restart the TE30.

The default user name and password are root and Change_Me respectively.

U-Boot password (for the TE40&TE50&TE60&TX50 only)

12345678

Upgrade password

Change_Me

VPT300 upgrade password (for the TE40&TE50&TE60&TX50 only)

Change_Me

Connection password for the Air Content Sharing client/AirPresence PC client

Change_Me

Default IP address after the endpoint is restored to its default settings

192.168.1.1

Information required for the network management system to connect to the endpoint through SNMP V2

Get community name

Change_Public

Set community name

Change_Private

Trap community name

Change_Me

Account, password, and protocol required for the network management system to connect to the endpoint through SNMP V3

User name

v3user

Authentication protocol

SHA

Authentication password

Change_Me

Encryption protocol

AES

Encryption password

Change_Me

Wi-Fi hotspot name and password

  • Wi-Fi hotspot name
    • TE30 Wi-Fi hotspot name: TE30_wifi_ap+10-digit number
    • TE40 Wi-Fi hotspot name: TE40_wifi_ap+10-digit number
    • TE50 Wi-Fi hotspot name: TE50_wifi_ap+10-digit number
    • TE60 Wi-Fi hotspot name: TE60_wifi_ap+10-digit number
    • TX50 Wi-Fi hotspot name: TX50_wifi_ap+10-digit number
  • Password

    The default password varies depending on the value of Encryption mode.

    • When Encryption mode is set to NONE, the default password is empty.
    • When Encryption mode is set to WEP, the default password is wifi_ap_wep_1.
    • When Encryption mode is set to TKIP or AES, the default password is Change_Me.
Table D-2 Default IP addresses

Device

Internal IP Address

Default External IP Address

Remarks

endpoint

-

192.168.1.1

Set the external IP address based on the site requirements.

Wireless router

172.16.21.64

192.168.1.1

An external IP address needs to be configured for the WAN port of the wireless router.

Touch panel

172.16.21.65

-

-

VPT300 (for the TE40&TE50&TE60&TX50 only)

-

IP address: 192.168.1.1

Subnet mask: 255.255.255.0

Gateway address: 192.168.0.1

Set the VPT300 IP address based on the site requirements. The VPT300 IP address must be located in the same network segment as the external IP address of the endpoint.

Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30847

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next