No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing U-Boot Operations (TE40&TE50&TE60&TX50 Only)

Performing U-Boot Operations (TE40&TE50&TE60&TX50 Only)

After logging in to the U-Boot using the serial port tool, you can execute desired commands.

  1. Use a serial cable to connect the serial port on the computer to the COM1 serial port on the TE40, TE50, TE60, or TX50.
  2. Start the serial port tool and set information such as the serial port number and baud rate.

    Set the baud rate to 115200.

  3. Start the endpoint. When the interface shown in Figure 7-10 is displayed on the serial port tool, press Ctrl+C repeatedly until Password: is displayed.

    Figure 7-10 Starting the system

  4. Enter the password for logging in to the U-boot system, as shown in Figure 7-11. The default password is 12345678.

    To improve device security, set a password at the first login and regularly change the password afterward. Use the passwd command to change the password. The new password must be a string of eight characters, consisting of digits, letters, and special characters.

    Figure 7-11 Entering the password

  5. Enter the command, as shown in Figure 7-12. For details, see the TE30&TE40&TE50&TE60&TX50&RP100&RP200 Command Reference.

    Figure 7-12 Entering commands

Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30667

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next