No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring Factory Settings

Restoring Factory Settings

You can use the Restore Default function to restore the endpoint to its factory settings.


  • Before restoring the endpoint to its factory settings, back up its configuration file.
  • After the endpoint is restored to its factory settings, some of its information will be lost, including site information in the address book, call records, and logs.


You have obtained the SN of the endpoint that is to be restored to factory settings.

Log in to the endpoint web interface and choose Help > Version. On the version information page, you will see the SN of the endpoint.


  1. Log in to the endpoint web interface as the administrator.
  2. Choose System Settings > Installation.

    The System Status page is displayed.

  3. Click Restore Default. In the confirm dialog box, click Confirm.
  4. Enter the SN of the endpoint.
  5. Click Restore Default. In the confirm dialog box, click Confirm.
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 32137

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next