No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Cleanliness

Checking the Cleanliness

To ensure that your endpoint runs properly, check its cleanliness regularly.


If the endpoint runs for a long period of time but is not cleaned, its body, ports, heating vents, and camera lens may be covered with dust. Its performance may be compromised, impacting user experience. Therefore, it is necessary to regularly clean the endpoint and its peripherals, helping extend their service life and improve user experience.

Items to Check

Table 6-5 describes the items to be checked. If any of them does not meet the requirement, clean it accordingly.

Table 6-5 Cleanliness items



Embedded or standalone camera lens

The camera lens is clean.

Ports and heating vents

The ports and heating vents are clean.

Device body

The device body is clean.

Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30538

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next