No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Safety Precautions

Safety Precautions

To reduce potential risks, observe the following safety precautions when unloading and transporting equipment.

Personal Safety

  • Wear clean working gloves, overalls, a helmet, and a pair of work shoes, as shown in Table 4-1.
    Table 4-1  List of personal safety items
    Name Appearance

    Working gloves



    Work shoes

  • When moving the equipment into or out of an elevator, ask one person to control the elevator to prevent the elevator door from closing at the wrong time. See Figure 4-1.
    Figure 4-1  One person controlling the elevator

Equipment Security

  • Do not tip over the equipment. Ensure that the equipment is right side up when you lower it from the vehicle.
  • Carry and place the equipment carefully to ensure that it moves steadily at an even speed.
  • Ensure that the equipment does not collide with doors, thresholds, walls, or goods shelves.
  • Ensure that the equipment is not laid upside down or on its side and that the pallet of the wooden case faces towards the ground.
  • Slow down the vehicle before you take a turn. Before you take turns, adjust the position of equipment to ensure that it faces in the outside lane of the road and near the center line at turnings. See Figure 4-2.
    Figure 4-2  Route for transporting equipment at a turning

Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 46396

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next