No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Intra-Cabinet Components

Checking Intra-Cabinet Components

After installing all intra-cabinet components, check whether they are properly installed.

Prerequisites

All intra-cabinet components have been installed.

Procedure

  1. Components are installed to the correct positions as specified by engineering design documents.
  2. Panel screws of components are all present and fastened.
  3. Component exteriors are free of damage, stain, or paint peeling off.
  4. Labels attached to components are secured and free of peeling off.
  5. ESNs attached to components are secured and free of peeling off.
  6. Filler panels are installed for empty disk slots if there is any.
Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 46241

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next