No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting a Power Cable for a P36E or C36E Node

Connecting a Power Cable for a P36E or C36E Node

This section describes how to install a power cable for a P36E or C36E. The cable provides power supply for the P36E or C36E node. P36E or C36E has no ground terminal. Connect the cabinet housing the node to a PGND cable.

Prerequisites

  • Huawei cabinet-accompanying power distribution unit (PDU) or a third party's cabinet-accompanying power distribution device has been prepared.
  • All required tools have been prepared, containing Phillips screwdrivers, cable ties, diagonal pliers, and electrostatic discharge (ESD) gloves or an ESD wrist strap.
  • A P36E or C36E has been installed.

Context

For details about power distribution relationship of intra-cabinet components, see Overall Configurations.

Procedure

  1. Wear an ESD wrist strap or ESD gloves.
  2. Insert one end of the power cable into the cable connector on the AC power supply module of the P36E or C36E, as shown in Figure 9-3.

    Figure 9-3  Connecting an AC power cable

  3. Use a velcro strap to bundle the power cable onto the handle of the power module.
  4. Connect the other end of the power cable to the power port of the immediately adjacent PDU and then lock it up, as shown in Figure 9-4.

    To ensure that devices can operate stably, connect power cables on a device supplied by two power modules to separate PDUs.

    Figure 9-4  Connecting a power cable to a PDU port

  5. Arrange and bind power cables.
Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 43562

Downloads: 164

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next