No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Determining the Installation Location

Determining the Installation Location

Before installing the devices into the cabinet, you need to determine the installation location of each device to install the guide rails and floating nuts.


  • Make sure that the cabinet has been installed and grounded.
  • Required installation tools and materials, including a marker, are ready.
  • For easy maintenance, ventilation, and heat dissipation, make sure that the cabinet is at least 1000 mm distant from the walls and at least 1200 mm distant from other cabinets.
  • To keep a convective air transfer between the cabinet and the equipment room, no enclosed space is allowed in the cabinet. It is recommended that 1 U (1 U = 44.45 mm) space be left above and below each device.


  1. Determine the installation location of each device.

    For the installation locations of devices, see Overall Configurations. Install the devices according to the specific installation environment.

    Each three square holes correspond to 1 U height. Each 1 U height is lined out with the scale mark. If no 1 U scale mark is lined out on the front and rear columns of the cabinet, line out the scale mark to facilitate installation location.

  2. Optional: Before installing adjustable guide rails for the cabinet, use a marker to mark the positions for installing adjustable guide rails and securing screws on the mounting bars.
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 43491

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next