No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Cabinet Panel for OceanStor 9000

Installing a Cabinet Panel for OceanStor 9000

After installing devices and cables, you need to push the panel of the OceanStor 9000 cabinet back to its original position to ensure neat appearance.

Prerequisites

  • Devices have been installed in the cabinet.
  • Cables have been connected between devices.

Procedure

  1. Push the panel of the OceanStor 9000 cabinet back to its original position, as shown in Figure 12-1.

    Figure 12-1   Installing a panel in the OceanStor 9000 cabinet

  2. Insert the power cable at the back of the OceanStor 9000 cabinet panel into the power port of the PDU, as shown in Figure 12-2.

    NOTE:

    For details about the PDU power port into which the power cable at the back of the OceanStor 9000 cabinet panel is inserted, see the power distribution diagram in Overall Configurations.

    Figure 12-2  Connecting a power cable to a PDU port

  3. Arrange and bind power cables.
Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 45922

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next