No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Locating L-shaped Fixed Guide Rails and Floating Nuts (P25/P12/P36/C36/KVM/Switch)

Locating L-shaped Fixed Guide Rails and Floating Nuts (P25/P12/P36/C36/KVM/Switch)

If L-shaped fixed guide rails and floating nuts have been installed in the Huawei cabinet, ensure that the positions of the L-shaped fixed guide rails and floating nuts are consistent with the planned positions.

Prerequisites

The cabinet has been installed.

Procedure

  • Check the installation positions of the L-shaped fixed guide rails and floating nuts for P36/C36 nodes, as shown in Figure 8-3.

    Figure 8-3  Installation positions of L-shaped fixed guide rails and floating nuts for P36/C36 nodes

  • Check the installation positions of the L-shaped fixed guide rails and floating nuts for P25/P12 nodes, as shown in Figure 8-4.

    Figure 8-4  Installation positions of L-shaped fixed guide rails and floating nuts for P25/P12 nodes

  • Check the installation positions of the L-shaped fixed guide rails and floating nuts for KVMs/switches, as shown in Figure 8-5.

    Figure 8-5  Installation positions of L-shaped fixed guide rails and floating nuts for KVMs/switches

    NOTE:

    Non-standard L-shaped fixed guide rails are used for 1 U devices such as switches and KVMs. Unlike standard L-shaped fixed guide rails, non-standard L-shaped fixed guide rails have holes on them.

Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 44339

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next