No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FDR Cable

FDR Cable

This section describes functions, exteriors, and technical specifications of FDR cables.


FDR cables are used for connecting storage nodes and IB switches, as well as stacking IB switches.


The two ends of a stack cable must be covered by ESD caps.


Figure 15-158 shows the exterior of an FDR cable (3 m).
Figure 15-158  FDR cable exterior (3 m)

Figure 15-159 shows the exterior of a 10 m FDR cable.
Figure 15-159  FDR cable exterior (10 m)

Technical Specifications

Table 15-73 lists the technical specifications of FDR cables.
Table 15-73  Technical specifications of an FDR cable




FDR cable

Transfer rate

56 Gbit/s

Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 45824

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next