No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CE6851-48S6Q-HI

CE6851-48S6Q-HI

This section describes the function, exterior, ports, indicators, and technical specifications of a CE6851-48S6Q-HI switch.

Function

A CE6851-48S6Q-HI switch can provide forty-eight 10GE SFP+ Ethernet optical ports and six 40GE QSFP+ Ethernet optical ports for node interconnection and communication. Each 40GE QSFP+ Ethernet optical port can be used as four 10GE ports.

Exterior

Front view

Figure 15-122 shows the front view of the switch.

Figure 15-122  Front view of the switch (housing AC power modules)

1

Power module 1

2

Fan module 1

3

Console port

4

ETH management network port

5

USB port

6

Fan module 2

7

Power module 2

-

-

Rear view

Figure 15-123 shows the rear view of the switch.

Figure 15-123  Rear view of the switch

1

48 x 10GE SFP+ Ethernet optical ports

2

6 x 40GE QSFP+ Ethernet optical ports

Ports

Table 15-44 lists the ports of the switch.

Table 15-44  Ports of the switch

Port

Description

10GE SFP+ Ethernet optical port

Sends and receives GE or 10GE services.

40GE QSFP+ Ethernet optical port

Stacks switches or functions as an upstream port.

Console port

Connects to the console for onsite device configuration.

ETH management network port

Connects to the configuration terminal or network management workstation for building an onsite or remote configuration environment.

Figure 15-124 shows the numbering of 10GE SFP+ Ethernet optical ports on a CE6851-48S6Q-HI switch.
Figure 15-124  10GE SFP+ Ethernet optical ports on a CE6851-48S6Q-HI switch

Indicators

Figure 15-125 shows the indicators and buttons on the front panel.
Figure 15-125  Indicators and buttons on the front panel

1

STATUS indicator of the power supply

2

Power button

3

STATUS indicator of the fan module

4

MODE button/ID indicator

5

L/A indicator

6

ACT indicator

7

MST indicator

8

SYS indicator

Figure 15-126 shows the indicators and buttons on the rear panel.
Figure 15-126  Indicators and buttons on the rear panel

1

10GE optical port indicator

2

40GE optical port indicator

3

10GE mode indicator of the 40GE port (1, 2, 3, or 4)

4

ID indicator

5

MST indicator

6

SYS indicator

Table 15-45 describes the indicators on the front and rear panels of the switch.
Table 15-45  Indicator descriptions of the switch

Name

Color and Status

Description

SYS indicator

Off

The storage system is not running.

Green

  • Fast blinking: The storage system is starting.
  • Slow blinking: The storage system is correctly operating.

Steady red

  • The storage system is incorrectly started.
  • An alarm is generated on the power supply.
  • An alarm is generated on the fan.

MST indicator

Off

The device is not the primary stacking device. .

Steady green

The device is a primary stacking device or is not stacked.

ID indicator

Off

The ID indicator is off by default.

Steady blue

Operation and maintenance personnel can remotely turn on or turn off the ID indicator so that on-site engineers can locate the device.

10GE optical port indicator

NOTE:

Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top.

Off (green)

No link has been established on the port or the port has been disabled.

Steady green

A link is established on the port.

Off (yellow)

The port is not sending or receiving data.

Blinking yellow

The port is sending or receiving data.

40GE optical port indicator

NOTE:

Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top.

Off

No link has been established on the port or the port has been disabled.

Steady green

A link is established on the port.

Blinking green

The port is sending or receiving data.

When a 40GE port is configured as four 10GE ports, this indicator shows the status of a 10GE port. The sequence number of the indicated port is identified by indicators 40GE Breakout 1/2/3/4 on the lower right corner of the panel.
NOTE:

Each 40GE port has a single-color indicator, which shows the status of the 40GE port by default.

10GE mode indicator of the 40GE port (1, 2, 3, or 4)
NOTE:

Indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s.

Off

40GE ports are working in 40GE mode and not divided into four 10GE ports.

Steady green

At least one 40GE port has been divided into four 10GE ports. When one or more 40GE ports are divided into four 10GE ports, these indicators identify the sequence numbers of the 10GE ports. A port indicator (2 in Figure 15-126) shows the status of a 10GE port converted from the corresponding 40GE port:
  • When indicator 1 is on, each port indicator shows the status of the first 10GE port derived from the corresponding 40GE port.
  • When indicator 2 is on, each port indicator shows the status of the second 10GE port derived from the corresponding 40GE port.
  • When indicator 3 is on, each port indicator shows the status of the third 10GE port derived from the corresponding 40GE port.
  • When indicator 4 is on, each port indicator shows the status of the fourth 10GE port derived from the corresponding 40GE port.

ACT indicator

Off

The USB flash drive is not used for deployment by default.

Green

  • Steady on: Deployment is completed using a USB flash drive.
  • Blinking at 0.5 Hz: The data on the USB flash drive is being read.

Steady red

The USB-based deployment fails.

L/A indicator

Off

The link is abnormal.

Green

  • Steady on: The link is normal.
  • Blinking at 15 Hz: The port is receiving or sending data.

STATUS indicator of the power supply

Off

The input is abnormal, such as without power input, overvoltage, and undervoltage, or the output is abnormal, such as undervoltage and overheating.

Steady green

Normal

STATUS indicator of the fan module

Off

The fan module is not operating.

Green

  • Blinking at 0.5 Hz: The fan module is correctly operating and communicating.
  • Blinking at 4 Hz: The fan module is correctly operating but cannot correctly communicate.

Red

  • Steady on: The fan module is faulty.
  • Blinking at 0.5 Hz: An alarm is generated on the fan module. The causes for this problem include DIP switch errors, short circuits, fan blocking, and fan faults.

Technical Specifications

Table 15-46 lists the technical specifications of the switch.

Table 15-46  Technical specifications of the switch

Item

Specifications

Physical specifications

Dimensions (W x D x H)

442.0 mm x 420.0 mm x 43.6 mm

Fan quantity

2

Max. power consumption

245 W

Weight

8.7 kg

System specifications

CPU

1.2 GHz, quad-core

DRAM memory

2 GB

NOR flash memory

16 MB

NAND flash memory

1 GB

Power supply specifications

Rated voltage

200 V AC to 240 V AC; 50 Hz/60 Hz

Input voltage

90 V AC to 290 V AC; 45 Hz to 65 Hz

Environmental specifications

Temperature

  • Operating temperature: 0°C to 40°C (0 m to 1800 m)
    NOTE:

    When the altitude is between 1800 m and 5000 m, the highest operating temperature reduces 1°C every time the altitude increases 220 m.

  • Storage temperature: –40°C to +70°C

Relative humidity

5% RH to 95% RH (non-condensing)

Altitude

< 5000 m

Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 44453

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next