No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Intra-Cabinet AC Power Cable

Intra-Cabinet AC Power Cable

This section introduces functions, exterior, and technical specifications of an intra-cabinet AC power cable.

Function

The AC power cable is used to supply power to intra-cabinet devices, including nodes, switches, and KVM.

NOTE:
  • The default length of a delivered AC power cable is 3 m.
  • Power cables delivered to different regions may be equipped with different connectors. This manual uses a common AC power cable as an example.
  • If nodes are installed in a Huawei cabinet, delivery-attached power cables are used.

Exterior

An AC power cable delivered with the device has one end equipped with a PI straight male connector, which is connected to a user's AC power socket. The other end is equipped with a C13 straight female connector, which is connected to the AC power module of a device.

Figure 15-153 shows the exterior of an AC power cable delivered with the device.
Figure 15-153  AC power cable delivered with the device

L

Live line

E

Ground line

N

Neutral line

-

-

An AC power cable preinstalled in the HUAWEI cabinet has one end equipped with a C13 straight male connector, which is connected to a power distribution unit (PDU) in the cabinet. The other end is equipped with a C13 straight female connector, which is connected to the AC power module of a device. Figure 15-154 shows the exterior of an AC power cable preinstalled in the HUAWEI cabinet.
Figure 15-154  AC power cable preinstalled in the HUAWEI cabinet

Technical Specifications

Table 15-64 describes the technical parameters of an AC power cable.

Table 15-64  Technical specifications of an AC power cable

Item

Specifications

Connector 1

PI straight male connector or C13 straight male connector

Connector 2

C13 straight female connector

Rated voltage

250 V AC

Rated current

10 A

Cable jacket color

Black

Cross-sectional area

3 x 1.0 mm2

Cable name

227IEC53-1.02 (3C)

Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 46044

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next