No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Label Specifications

Label Specifications

This section describes specifications for writing and printing labels.

Printed Engineering Labels

For higher efficiency and better appearance, printing of engineering labels is recommended. When using a printer to prepare engineering labels, observe the following:
  • Use a laser printer.
  • Before printing a label, try printing on ordinary blank paper to check for mistakes.
  • When printing engineering labels, manually feed label paper individually. To avoid jamming the printer, do not use the auto-feed mode. Different from ordinary paper, the label paper is composed of two pages. Feed the label paper from the correct direction and position based on the printer model.

Hand-Written Labels

When writing engineering labels, observe the following to ensure that the hand-written labels are clear and legible:
  • Use the black oil-based markers delivered with the device to write labels.
  • The font in handwriting should be close to the standard typeface (Times New Roman) as much as possible. Figure 15-181 shows the standard typeface.

    Figure 15-181  Standard typeface

  • Write characters in proper size depending on the number of digits and letters.
  • Make your writing clear and tidy.
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 44413

Downloads: 164

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next