No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Alarm and Safety Symbols

Alarm and Safety Symbols

When you install and maintain equipment, observe the precautions provided by alarms and safety symbols to prevent personal injury or equipment damage.

Table 1-1 lists the safety symbols stuck on equipment.

Table 1-1  Safety symbols stuck on equipment

Symbol

Description

ESD Protection Symbol

Indicates a caution that you need to wear an electrostatic discharge (ESD) wrist strap or glove to avoid damage caused by static electricity to boards.

Enclosure Grounding Symbol

Indicates the position of the grounding point.

System Disk Swap and Install Warning Symbol

Indicates that you should be cautious to swap, install, or pull out a system disk.

Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 46064

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next