No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
S5700-52C-SI/S5352C-SI

S5700-52C-SI/S5352C-SI

This section introduces the functions, exterior, ports, indicators, and technical specifications of S5700-52C-SI/S5352C-SI Ethernet switches.

Function

An S5752/S5352 switch is a device that connects servers and enables data communication and active/standby configuration for connected components.

Exterior

Front view

Figure 15-137 shows the front view of an S5752/S5352 switch.
Figure 15-137  Front view of an S5752/S5352 switch

1

48 x 10/100/1000BASE-T Ethernet electrical ports

2

Console port

3

Management network port

4

USB port

5

Front card slot

-

-

NOTE:
  • A front card with two 10GE XFP optical ports is installed for an S5352C-SI switch.
  • A front card with two 10GE SFP+ optical ports is installed for an S5700-52C-SI switch.

Rear view

Figure 15-138 shows the rear view of the switch.
Figure 15-138  Rear view of the switch (housing AC power modules)

1

ESD jack

2

Rear card

3

Fan module

4

Power modules

Ports

Table 15-53 lists the ports of the switch.

Table 15-53  Ports of the switch

Port

Description

10/100/1000BASE-T Ethernet electrical port

Sends and receives Ethernet services.

Console port

Connects to the console for onsite device configuration.

Management network port

Accesses and manages Ethernet switches.

10 Gbit/s optical port

Sends and receives 10GE services.

Figure 15-139 shows the numbering of the forty-eight 10/100/1000BASE-T Ethernet electrical ports on an S5752/S5352 switch.
Figure 15-139  Ethernet electrical ports on an S5752/S5352 switch

Indicators

Figure 15-140 shows buttons and indicators on the front panel of an S5752/S5352 switch.
Figure 15-140  Buttons and indicators on the front panel of an S5700-52C-SI/S5352C-SI switch

1

Ethernet electrical port indicator

2

Data transfer indicator

3

Link indicator

4

Mode switching indicator (MODE)

5

Power indicator (PWR1)

6

Power indicator (PWR2)

7

System status indicator (SYS)

8

Mode switching button

Table 15-54 describes indicators on the front panel.
Table 15-54  Indicators on the front panel

Name

Color

Status

Ethernet electrical port indicator

Green

The meanings of the indicator is related to the working mode, see Table 15-55.

Data transfer indicator

Orange

  • Blinking: Data is being transferred through the port.

  • Off: No data is being transferred.

Link indicator

Green

  • Steady on: Port link is normal.

  • Off: Port link is abnormal.

Mode switching indicator (MODE)

Green

Steady on: The service port indicator is temporarily used to indicate the port speed and will be restored to its default mode (Off) in 45 seconds.

Red

Steady on: The service port indicator is temporarily used to indicate the device stack ID and will be restored to its default mode (Off) in 45 seconds.

Off

Off: The service port indicator is in default mode. In this mode, the port state is STAT.

Power indicator (PWR1)

Green

Steady on: The power module is working properly.

Red

Steady on: The power module is working improperly.

Off

Off: The power supply units are not located, or the power module is abnormal due to single power supply.

Power indicator (PWR2)

Green

Steady on: The power module is working properly.

Red

Steady on: The power module is working improperly.

Off

Off: The power supply units are not located, or the power module is abnormal due to single power supply.

System status indicator (SYS)

Green

  • Steady on: The system is working improperly or is being started.

  • Blinking: The system is working properly.

Orange

The system is implementing a self check.

Red

Steady on: The system is working improperly.

Off

Off: The system is not started.

The mode switching button is used to switch the working mode of the Ethernet electrical port.
  • When you press the mode switching button once, the mode indicator turns green and the related interface indicator enters the speed state.
  • When you press the mode switching button for a second time, the mode indicator turns red and the related interface indicator represents the stack status.
  • When you press the mode switching button for a third time, the mode indicator restores to the default state (off).
  • If you do not press the mode switching button within 45 seconds, the mode indicator automatically restores to off.
Table 15-55 describes the meanings of Ethernet electrical port indicators in different modes.
Table 15-55  Description of indicators in different modes

Name

Status

Description

STAT

Off

The port is not connected or has been shut down.

Steady green

The port is connected.

Blinking green

The port is sending or receiving data.

Speed

Off

The port is not connected or has been shut down.

Steady green

10M/100M/1000M port: The port is operating at 10/100 Mbit/s.

1000M/10G port: The port is operating at 1000 Mbit/s.

Blinking green

10M/100M/1000M port: The port is operating at 1000 Mbit/s.

1000M/10G port: The port is operating at 1000 Mbit/s.

Stack

Off

The stack ID of the switch is not the ID of the port in the off state.

Steady green

The device is not a principal switch, and:
  • If the indicator of a port is steady on, the ID of this port is the stack ID of the device.
  • If the indicators of the first nine ports are steady on, the stack ID of the device is 0.

Blinking green

The device is a principal switch, and:
  • If the indicator of a port blinks, the ID of this port is the stack ID of the device.
  • If the indicators of the first nine ports blink, the stack ID of the device is 0.

Technical Specifications

Table 15-56 lists the technical specifications of the switch.
Table 15-56  Technical specifications of the switch

Item

Specifications

Physical specifications

Dimensions (H x W x D)

43.6 mm x 442.0 mm x 420.0 mm

Fan quantity

2

Max. power consumption

64 W

Weight

8.5 kg

System specifications

CPU

Frequency: 800 MHz

Switching capacity

176 Gbit/s

Packet forwarding capability

130.94 mpps

DDR memory

256 MB

Flash memory

32 MB

Power supply specifications

Rated input voltage

200 V AC to 240 V AC; 50 Hz or 60 Hz

Maximum input voltage

90 V AC to 264 V AC; 47 Hz to 63 Hz

Environmental specifications

Temperature

  • Operating temperature: 0°C to 50°C
  • Storage temperature: –40°C to +70°C

Relative humidity

10% RH to 90% RH

Altitude

0 m to 2000 m

Translation
Download
Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 46648

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next