No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V300R006C20 Hardware Installation Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the OceanStor 9000 Cabinet Panel

Removing the OceanStor 9000 Cabinet Panel

If switches need to be installed into the planned positions in a cabinet, remove the OceanStor 9000 cabinet panel before the installation.


Installation positions of switches have been located in the cabinet.


  1. Hold the latches at the both sites of the panel on OceanStor 9000 that you want to disassemble and press the latches inwards to unlock the panel and remove it, as shown in Figure 8-2.

    Figure 8-2  Removing the cabinet panel

Updated: 2019-03-26

Document ID: EDOC1000185366

Views: 50103

Downloads: 172

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next