Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Chassis Cover
Procedure
- Power off the server.
For details, see Power-Off Procedure.
- Remove the power cables from the PSUs.
For details, see Removing PSU Cables.
- Remove the server.
For details, see Removing a 2488H V5.
- Place the server on the ESD workstation.
- Remove the chassis cover.
- Use a flat-head screwdriver to loosen the latch screw of the cover counterclockwise. See (1) in Figure 8-18.
- If no flat-head screwdriver is available onsite, you can use a Phillips screwdriver (PH2.0 is recommended).
- Do not use an electric screwdriver. Otherwise, the lock slot of the chassis cover may be damaged due to high rotational speed.
- Open the ejector lever on the cover and the cover moves backwards automatically. See (2) in Figure 8-18.
- Lift the chassis cover. See (3) in Figure 8-18.
- Use a flat-head screwdriver to loosen the latch screw of the cover counterclockwise. See (1) in Figure 8-18.