No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

RESTful API Reference
CloudEngine 12800 and 12800E V200R003C00

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Log Recording

Log Recording

  • Function Description

    The OPS's embedded running environment provides syslog functions. When scripts are running on a device, some information is recorded in the device's log.

  • Command Prototype

    opsObj.syslog(content, severity="informational", logtype="syslog")

  • Parameter Description
    Table 3-907  Parameters supported by syslog




    Specifies an OPS object. It is obtained using ops.ops() in instance mode.


    Specifies log content, which supports a maximum of 512 bytes. If the content length exceeds 512 bytes, information fails to be recorded in the log.


    Specifies a log level, which can be criticalerrorwarning, or informational (in descending order). The default level is informational.


    Specifies a log type, which can be syslog or diagnose. If syslog is specified, information is recorded in the syslog. After a syslog server is configured, the syslog is uploaded to the syslog server. If diagnose is specified, information is recorded in the diagnostic log. The default value is syslog.

  • Description of Return Values

    First return value: The value 0 indicates a success; the value 1 indicates a failure.

    Second return value: This value describes success or failure reasons.

  • Example
    improt ops
    opsObj = ops.ops()
    opsObj.syslog("Record an informational syslog.")

    After the script is run, information is recorded in the syslog.

Updated: 2019-05-05

Document ID: EDOC1100004147

Views: 59605

Downloads: 28

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next