No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches VXLAN Best Practices

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Firewall Access Design

Firewall Access Design

Firewalls can be connected as follows:

  • (Recommended) Firewalls are connected to gateways in bypass mode at both sides.
  • Firewalls are connected to service leaf nodes.
  • Firewalls are deployed between gateways and PEs.

In Figure 1, firewalls are connected to gateways in bypass mode at both sides. The network topology is simple, so the configuration and deployment are simplified. In addition, firewalls can be extended when devices in the gateway group increase, and security policies can be flexibly deployed.

This access solution is recommended.

Figure 2-5 Networking where firewalls are connected to gateways in bypass mode at both sides

Translation
Download
Updated: 2018-07-02

Document ID: EDOC1100004176

Views: 17888

Downloads: 552

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next