No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches VXLAN Best Practices

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LB Access Design

LB Access Design

In Figure 1, LBs are connected to border leaf nodes in bypass mode at both sides. LBs are enabled with SNAT and DNAT, and gateways are connected to LBs through VLANIF interfaces or Layer 3 routed interfaces. The topology where LBs are connected to gateways is simple and can be extended as devices in the gateway group increase. When load balancing services need to be flexibly deployed, LBs are connected in Layer 3 mode, and floating IP addresses of LBs are on different network segments of servers, this access solution is recommended.

Figure 2-6 Networking where LBs are connected to border leaf nodes in bypass mode

Translation
Download
Updated: 2018-07-02

Document ID: EDOC1100004176

Views: 18012

Downloads: 556

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next