No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - Device Management
CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Trap Output Configuration

Verifying the Trap Output Configuration


  • Run the display info-center channel [ channel-number | channel-name ] command to view the channel configuration.
  • Run the display logfile file-name [ offset ] command to check the log file.
  • Run the display logfile [ log | diagnose ] list starttime starttime-value endtime endtime-value [ slave ] command to check the log file list within the specified period.
  • Run the display trapbuffer [ size value ] command to check traps recorded in the trap buffer.
Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 77052

Downloads: 27

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next