No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for the OPS

Application Scenarios for the OPS

Automatic Deployment of Unconfigured Devices

As shown in Figure 10-3, SwitchA has no configuration file. After SwitchA is powered on, it obtains the IP address of the script file server from the DHCP server and downloads a Python script from the script file server. The SwitchA runs the Python script to download the system software and configuration file. SwitchA then restarts with the system software and configuration file, and the automatic deployment is complete.
Figure 10-3 Unconfigured Device deployment by running a Python script on the OPS

Automatic Health Check

Traditionally, you need to log in to a device and check the hardware and service running status using multiple commands to determine the health of the device. This method is time-consuming and requires much manpower.

To implement automatic health check, you can configure the maintenance assistant function on a device, as shown in Figure 10-4. The device then automatically runs the health check commands, periodically collects health check results, and sends the results to a server for analysis. This function reduces maintenance workload. When a fault occurs on the device, the system runs the preconfigured commands or script to isolate the faulty module or rectify the faulty.

Figure 10-4 Device automatically collects health information and sends it to a server

Automatic Configuration File Backup

In Figure 10-5, a maintenance assistant is configured on the device and bound to the configuration file saving event. After the configuration is saved, the device runs a Python script to send the configuration file to the server for backup. This process reduces the manual backup workload.

Figure 10-5 Device automatically backing up the configuration file to a server
Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 69840

Downloads: 26

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next