No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Information Output Format

Information Output Format

Figure 3-2 shows the information format.
Figure 3-2 Information output format
Table 3-4 describes each field.
Table 3-4 Information output fields





Leading character.

This character is added to the information to be sent to the syslog server, not the information saved on a local device.


Time information to output.

Five timestamp formats are available:

  • boot: indicates that the timestamp is expressed in the format of relative time, which is a period of time since the system started. The format is xxxxxx.yyyyyy, where xxxxxx is the higher order 32 bits of the milliseconds elapsed since the start of the system and yyyyyy is the lower order 32 bits of the milliseconds elapsed since the start of the system.

  • date: indicates the current date and time. The format is mm dd yyyy hh:mm:ss.

  • short-date: indicates the short date. Except for not displaying the year, this timestamp is the same as date.

  • format-date: indicates that the timestamp is expressed in the format: YYYY-MM-DD hh:mm:ss.

The timestamp and the host name are separated by a space.


Host name.



Huawei identifier.

The information is output by Huawei products.


Version number.

Version number of the information.


Module name.

Name of the module that outputs information to the information center.


Information severity.

Information severity.

This field is used to differentiate between information of different severities.


Brief description.

Brief description about information.


Information type.

The information types are as follows:

  • l: log.

  • t: trap.


Number of a component inside the system.

Identifies an internal component to which the information belongs. ZZZ denotes the system component ID.



Information content.

Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 70636

Downloads: 26

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next