No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the WTR Time for a Clock Source

Configuring the WTR Time for a Clock Source


When the system detects that a clock source returns from abnormal to normal, the clock source status is updated only after the configured WTR time is up. Configuring a proper WTR time for a clock source can efficiently reduce the impact of frequent clock source status changes on clock source selection.


  1. Run system-view

    The system view is displayed.

  2. Run clock wtr wtr-time

    The WTR time is configured for a clock source.

    By default, the WTR time of a clock source is 5 minutes.

  3. Run commit

    The configuration is committed.

Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 71403

Downloads: 26

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next