No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - Device Management
CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Uploading Performance Statistics Files

(Optional) Uploading Performance Statistics Files


The system generates performance statistics files based on the collected performance statistics at a specified interval. To view the performance statistics on a performance management (PM) server, upload performance statistics files to the PM server.

The system uses FTP or SFTP to upload statistics files to a PM server. Statistics files can be uploaded in either of the following modes:
  • Active mode: The system periodically generates statistics files and automatically uploads the files to the PM server.

  • Passive mode: The system periodically generates statistics files. When the system receives a file uploading instruction from the network management system or a file uploading command is executed, the system uploads the statistics files to the PM server.


Using FTP to upload performance statistics files is insecure. Therefore, SFTP is recommended.


  1. Run system-view

    The system view is displayed.

  2. Run pm

    The PM view is displayed.

  3. Run pm-server server-name

    A process serving the PM server is created, and the PM server view is displayed.

  4. Run the following commands to configure parameters of the PM server to which a performance statistics file will be uploaded.

    • To configure the protocol, IP address, and port number to upload a performance statistics file to the PM server, run the protocol { ftp | sftp } ip-address ip-address [ port port-number | { net-manager-vpn | vpn-instance vpn-instance-name } ] * command.

      By default, the PM server port number is 21 (using FTP) or 22 (using SFTP).

    • To configure a user name and password for logging in to the PM server, run the username user-name password password command.
    • To specify the path to save performance statistics file on the PM server, run the path destination-path command.

      By default, performance statistics files are uploaded to the default path on a PM server.

    • To configure the number of retransmissions for a performance statistics file, run the retry retry-times command.

      The default number of retransmissions is 3.

  5. Run quit

    Return to the PM view.

  6. Run upload-config request-name server server-name

    A request for uploading performance statistics files to a specified PM server is created.

  7. Upload statistics files to a PM server.

    • Configure the device to automatically upload statistics files.

      1. Run statistics-task task-name

        The performance statistics task view is displayed.

      2. Run upload auto request-name

        The device is enabled to automatically upload performance statistics files to the PM server.

    • Manually upload statistics files.

      1. (Optional) Run display pm statistics-file [ task-name ]

        The performance statistics file list is displayed.

      2. Run upload request-name file filename &<1-16>

        Statistics files are uploaded to the PM server.

  8. Run commit

    The configuration is committed.

Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 77533

Downloads: 27

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next