No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding Performance Management

Understanding Performance Management

Performance management can collect the following data:
  • Interface traffic statistics, for example, the number of packets sent and received on an Ethernet interface

  • Protocol packet statistics, for example, the number of a specific type of protocol packets

  • System running parameters, for example, CPU usage statistics

The statistics collection function involves various statistics collection tasks, each of which can be bound to multiple statistics collection instances. After you create a statistics collection task, the system periodically collects data in the instances bound to the task and calculates the statistical counters in each statistics collection cycle. The statistics are periodically saved to statistics files.

The system uses FTP or SFTP to upload statistics files to a remote performance management (PM) server. Statistics files can be uploaded in either of the following modes:
  • Active mode: The system periodically generates statistics files and automatically uploads the files to the PM server.

  • Passive mode: The system periodically generates statistics files. When the system receives a file uploading instruction from the network management system (NMS) or a file uploading command is executed, the system uploads the statistics files to the PM server.


Using FTP to upload performance statistics files is insecure. Therefore, using SFTP is recommended.

Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 69816

Downloads: 26

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next