No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling the NTP Function

Disabling the NTP Function


If a device does not need to synchronize the clock with an external server or peer, you can disable the NTP function on the device. If a device does not need to provide a clock reference source for external devices, you can disable the NTP function or the NTP server on the device.


The existing configuration is not deleted when the NTP function is disabled.


  1. Run system-view

    The system view is displayed.

  2. Run the following commands to disable the NTP service:

    • Run ntp [ ipv6 ] disable

      The NTP function is disabled.

      By default, the NTP function is enabled.

    • Run ntp [ ipv6 ] server disable

      The NTP server is disabled.

      By default, the NTP server is enabled.

Updated: 2019-05-05

Document ID: EDOC1100004193

Views: 69686

Downloads: 26

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next