No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Interface Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Collecting Protocol Packet Statistics Based on Protocol Types

Collecting Protocol Packet Statistics Based on Protocol Types

Context

After this function is enabled on interfaces or system, you can know how many packets of a certain protocol are received on interfaces and whether all the protocol packets received on interfaces are correct.

Procedure

  • Configuring the system to collect protocol packet statistics based on protocol types

    1. Run system-view

      The system view is displayed.

    2. Run ip host packet statistics protocol all

      The system is configured to collect protocol packet statistics based on protocol types.

      By default, the system does not collect protocol packet statistics based on protocol types.

    3. Run commit

      The configuration is committed.

  • Configuring an interface to collect protocol packet statistics based on protocol types

    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run ip host packet statistics protocol enable

      The interface is configured to collect protocol packet statistics based on protocol types.

      By default, an interface does not collect protocol packet statistics based on protocol types.

    4. Run commit

      The configuration is committed.

Follow-up Procedure

  • Run the display ip host packet statistics receive protocol interface interface-type interface-number command in any view to check protocol packet statistics on interfaces.
  • Run the display ip host packet statistics receive protocol command in any view to check protocol packet statistics in the system.

  • Run the display ip host packet statistics receive command in any view to check packet statistics on the top 10 interfaces receiving the most packets.
  • Run the display ip host packet statistics receive protocol { arp | stp | lacp | lldp | isis | icmp | ospf | pim | igmp | vrrp | snmp | dhcp | bgp | ldp | icmpv6 | ospfv3 | pimv6 | igmpv6 | vrrpv6 | snmpv6 | dhcpv6 | bgp4plus | ldpv6 } command in any view to check information about the top 10 interfaces receiving most specified protocol packets.

  • Run the display ip host packet statistics send protocol [ arp | stp | lacp | lldp | isis | icmp | ospf | pim | igmp | vrrp | snmp | dhcp | bgp | ldp | icmpv6 | ospfv3 | pimv6 | mld | vrrpv6 | snmpv6 | dhcpv6 | bgp4plus | ldpv6 ]command in any view to check statistics about different protocol packets sent on a device.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004195

Views: 18846

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next