No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Interface Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Interface Statistics

Clearing Interface Statistics

Context

To monitor the status of an interface or locate faults on the interface, you can collect traffic statistics about the interface. Before collecting traffic statistics on an Ethernet interface within a period, delete the existing traffic statistics on this interface.

The traffic statistics on an Ethernet interface cannot be restored after they are cleared. Exercise caution before clearing the statistics.

Procedure

  • Run reset interface counters [ interface-type [ interface-number [.subinterface-number ] ] ]

    Statistics on the specified interface are cleared.

  • Run reset interface [ interface-type interface-number ] virtual-cable-test

    The cable test results of the interface are cleared.

  • Run reset ip host packet statistics receive protocol interface interface-type interface-number

    Statistics about protocol-specific packets received on the interface are cleared.

  • Run reset ip host packet statistics receive

    Statistics about packets received on all interfaces are cleared.

  • Run reset ip host packet statistics send protocol [ arp | stp | lacp | lldp | isis | icmp | ospf | pim | igmp | vrrp | snmp | dhcp | bgp | ldp | icmpv6 | ospfv3 | pimv6 | mld | vrrpv6 | snmpv6 | dhcpv6 | bgp4plus | ldpv6 ] [ slot slot-id ]

    Global statistics about protocol-specific sent packets are cleared.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004195

Views: 19088

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next