No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Interface Management

CloudEngine 12800 and 12800E V200R003C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic Interface Parameter Configuration

Verifying the Basic Interface Parameter Configuration

Procedure

  • Run the display interface [ interface-type [ interface-number ] ] command to check running status information about an interface, including the running status, basic configuration, and packet forwarding of the interface.
  • Run the display interface counters errors [ slot slot-id ] command to check error packet statistics of all service interfaces.
  • Run the display interface brief [ interface-type ] [ main ] or display interface brief panel-order command to check brief interface status and configuration information, including the physical status, protocol status, bandwidth usage in the inbound and outbound directions during a certain period of time, and the numbers of sent and received error packets.
  • Run the display interface ethernet brief main non-unicast command to check brief multicast and broadcast packet information about all physical Ethernet main interfaces, including the physical status, protocol status, and statistics on multicast and broadcast packets in the inbound and outbound directions.
  • Run the display ip interface [ interface-type interface-number ] command to check the IP configuration of an interface.
  • Run the display interface description [ interface-type [ interface-number ] ] command to check the description of an interface.
  • Run the display interface counters [ inbound | outbound ] [ interface-type [ interface-number ] ] command to check traffic statistics on an interface.
  • Run the display interface counters rate [ inbound | outbound ] [ interface-type [ interface-number ] ] command to check the incoming or outgoing traffic rate of an interface.
Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004195

Views: 18942

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next