No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Congestion Avoidance

Configuring Congestion Avoidance

When packets are discarded due to congestion, configure congestion avoidance on the device. Then the device processes packets of different services (differentiated by CoS values or colors) in a different manner, and ensures bandwidth of important services so that fewer packets of important services are discarded.

Pre-configuration Tasks

Before configuring congestion avoidance, complete the following task, map the priority of packets to a per-hop behavior (PHB) and color.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004202

Views: 21640

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next