No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Priority Mapping

Application Scenarios for Priority Mapping

Networking Requirements

As shown in Figure 3-4, data center users obtain voice, video, and data services from the servers. Service flows are transmitted from the servers to users across the network through SwitchA and SwitchB. The voice, video, and data services must be assigned priorities in descending order so that network devices can provide differentiated services for the service flows based on their priorities.

The precedence field in a packet depends on the network type. For example, packets on a Layer 2 network carry the 802.1p field and those on a Layer 3 network carry the DSCP field. Upon receipt of packets, the device maps packet priorities to CoS values and colors, and provides differentiated QoS services according to CoS values and colors. When transmitting packets, the device re-marks the precedence fields of the packets based on the CoS values and colors. The downstream device can then provide differentiated services based on packet priorities.

Figure 3-4 Networking of priority mapping

Service Deployment
  • On SwitchA, configure a traffic policy in the inbound direction to re-mark voice, video, and data packets with different 802.1p priorities and DSCP priorities. The priorities of voice, video, and data services are in descending order.
  • Configure SwitchA to map 802.1p priorities of incoming packets to CoS values and colors. SwitchA then provides differentiated services according to CoS values and colors.
  • Configure SwitchB to map DSCP priorities of incoming packets to CoS values and colors. SwitchB then provides differentiated services according to CoS values and colors.
Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004202

Views: 32035

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next