No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - QoS

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing ACL-based Traffic Statistics

Clearing ACL-based Traffic Statistics


Before recollecting ACL-based traffic statistics, you need to clear existing statistics.

The cleared ACL-based traffic statistics cannot be restored.


  • Run the reset traffic-statistics { vlan vlan-id | interface interface-type interface-number | qos group group-id } [ inbound | outbound ] or the reset traffic-statistics global [ slot slotid ] [ inbound ] command to clear ACL-based traffic statistics on the device.
Updated: 2019-05-05

Document ID: EDOC1100004202

Views: 31266

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next