No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - QoS

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying ACL-based Traffic Statistics

Displaying ACL-based Traffic Statistics


After ACL-based packet filtering is configured on the device, you can check statistics on forwarded and discarded packets.


  • Run the display traffic-statistics { vlan vlan-id | interface interface-type interface-number | qos group group-id } [ inbound | outbound ] [ rule-base ] or the display traffic-statistics global [ slot slotid ] [ inbound ] [ rule-base ] command to check ACL-based traffic statistics on the device.
Updated: 2019-05-05

Document ID: EDOC1100004202

Views: 39241

Downloads: 27

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next