No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Specifying the Packet Priority Trusted on an Interface

Specifying the Packet Priority Trusted on an Interface

Context

The priority trusted on an interface determines the type of priority to be mapped for packets on the interface.

By default, an interface trusts the default 802.1p priority. After packets arrive at an interface:
  • In Layer 2 forwarding mode

    If packets carry tags, the interface trusts the 802.1p priority. If packets carry no tag, the interface forwards them based on the interface priority.

  • In Layer 3 forwarding mode

    Configure the interface to trust DSCP priorities.

NOTE:

If an Ethernet interface is switched to Layer 3 mode using the undo portswitch command, this interface trusts DSCP priorities by default. When working in Layer 3 mode, the interface cannot be configured to trust other priorities.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run trust { 8021p { inner | outer } | dscp }

    The priority for packet mapping is specified.

    By default, an interface trusts 802.1p priorities in outer VLAN tags.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004202

Views: 21520

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next