No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preventing Forwarding Failures of VXLAN Traffic in Non-enhanced Mode

Preventing Forwarding Failures of VXLAN Traffic in Non-enhanced Mode

Context

When the device works in non-enhanced mode, inter-card forwarding of VXLAN traffic may fail. To prevent forwarding failures and ensure that VXLAN functions properly, configure the assign forward nvo3 f-linecard compatibility enable command.
NOTE:

This command can be configured in non-enhanced mode only.

CE12800E does not support the function.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run assign forward nvo3 f-linecard compatibility enable

    Forwarding failure prevention of VXLAN traffic in non-enhanced mode is enabled.

    By default, forwarding failure prevention of VXLAN traffic in non-enhanced mode is not configured.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 31026

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next