No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the VXLAN Alarm Function

Configuring the VXLAN Alarm Function

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent trap enable feature-name nvo3 [ trap-name { hwnvo3vxlantnldown | hwnvo3vxlantnlup | hwnvo3vxlanipv6tnldown | hwnvo3vxlanipv6tnlup } ]

    The VXLAN alarm function is enabled.

    By default, the VXLAN alarm function is disabled.

  3. Run commit

    The configuration is committed.

Verifying the Configuration

After the VXLAN alarm function is enabled, check the VXLAN alarm status.

Run the display snmp-agent trap feature-name nvo3 all command to check configurations of all alarm functions of the VXLAN module.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 25541

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next